Extreme Networks Summit WM User Manual page 118

Configuring the Altitude AP
To configure 802.1X PEAP authentication:
1 From the main menu, click Altitude AP Configuration. The Altitude APs page is displayed.
2 In the Altitude AP list, click the Altitude AP for which you want to configure 802.1X PEAP
authentication.
3 Click the 802.1X tab.
4 In the Username drop-down list, click the value you want to assign as the username credential:
Name - The name of the Altitude AP, which is assigned on the WAP Properties tab. The Altitude
AP name can be edited.
Serial - The serial number of the Altitude AP. The Altitude AP serial number cannot be edited.
MAC - The MAC address of the Altitude AP. The Altitude AP MAC address cannot be edited.
Other - Click to specify a custom value. A text box is displayed. In the text box, type the value
you want to assign as the username credential.
5 In the Password drop-down list, click the value you want to assign as the password credential:
Name - The name of the Altitude AP, which is assigned on the WAP Properties tab. The Altitude
AP name can be edited.
Serial - The serial number of the Altitude AP. The Altitude AP serial number cannot be edited.
MAC - The MAC address of the Altitude AP. The Altitude AP MAC address cannot be edited.
Other - Click to specify a custom value. A text box is displayed. In the text box, type the value
you want to assign as the password credential.
6 To save your changes, click Save.
The 802.1X PEAP authentication configuration is assigned to the Altitude AP. The Altitude AP can
now be deployed to a 802.1X enabled switch port.
118
Summit WM User Guide, Software Version 5.3