Extreme Networks Summit WM User Manual page 228

WM Access Domain Services configuration
Assigning the Satellite Altitude APs' radios to the network WM-ADs
You must assign the Satellite Altitude APs's radios to the network WM-ADs.
NOTE
The network WM-ADs are the usual WM-ADs on which the Altitude APs service the client devices. Routed, Bridge
Traffic Locally at WM and Bridge Traffic Locally at AP WM-ADs are the network WM-ADs. For more information, see
"WM-AD Types" on page
To assign the Satellite Altitude APs' radios to the network WM-AD:
1 From the main menu, click WM Access Domain Configuration. The WM Access Domain
Configuration page is displayed.
2 In the left pane WM Access Domains list, click the network WM-AD that you want to assign to the
radios of Satellite Altitude APs.
3 Click the RF tab.
4 In the Altitude APs list, select the radios of the Satellite APs - Osborn, Oscar, Orson and Oswald.
NOTE
If you want the Root Altitude AP and the Repeater Altitude APs to service the client devices, you must select
their radios in addition to the radios of the Satellite Altitude APs.
5 To save your changes, click Save.
6 Log out from the Summit WM Controller.
228
156.
Summit WM User Guide, Software Version 5.3