Viewing Displays For The Mobility Manager - Extreme Networks Summit WM User Manual

NOTE
In the latest models of the Summit WM 200/2000 Controller, the IXP2800 Network Processor in the NPE Card has
been replaced by the new IXP2805 Network Processor. Consequently, the Manufacturing Information in all such
latest models displays CPU Type as 2805.

Viewing displays for the mobility manager

When a Summit WM Controller has been configured as a mobility manager, two additional displays
appear as options on the Reports & Displays page:
Client Location in Mobility Zone - Displays the active wireless clients and their status
Mobility Tunnel Matrix - Displays a cross-connection view of the state of inter-controller tunnels, as
well as relative loading for user distribution across the mobility domain
To view mobility manager displays:
1 From the main menu, click Reports & Displays. The Reports & Displays page is displayed.
2 Click the appropriate mobility manager display:
Client Location in Mobility Zone
Mobility Tunnel Matrix
The colored status indicates the following:
Green - The mobility manager is in communication with an agent and the data tunnel has been
successfully established.
Summit WM User Guide, Software Version 5.3
283