Extreme Networks Summit WM User Manual page 32

Configuring the Summit WM Controller
3 In the browser address bar, type the following:
https://192.168.10.1:5825
This launches the Summit WM GUI. The login page is displayed.
4 In the User Name box, type your user name. The default is
5 In the Password box, type your password. The default is
NOTE
To reinforce security protection, the login password length has now been increased to eight characters.
- The Summit WM Controller continues to be shipped from the factory with a six character default password
(abc123). Although, when the Summit WM Controller is installed and you elect to change the default password,
the eight character constraint will be applied.
- The new password length constraint is not applied to existing passwords. When a six character password is
already being used and an upgrade of the software to V5 is performed, the software does not require the
password to be changed to eight characters. However, once the upgrade is completed and a new account is
created, or the password of an existing account is changed, the new password length requirement will be
enforced.
- If you reset the Summit WM Controller, the login user name and the password will also reset to the factory
defaults (admin and abc123).
NOTE
You can configure either the local login authentication mode, or the RADIUS login authentication mode to
authenticate the user's login attempts. While the local login authentication mode uses locally configured login
32
.
admin
.
abc123
Summit WM User Guide, Software Version 5.3