Configuring Altitude Aps Simultaneously - Extreme Networks Summit WM User Manual

To modify the system's default AP settings based on an already configured AP:
1 From the main menu, click Altitude AP Configuration. The Altitude APs page is displayed.
2 In the Altitude AP list, click the Altitude AP whose properties you want to become the system's
default AP settings. The WAP Properties tab displays Altitude AP information.
3 If applicable, modify the Altitude AP's properties. For more information, see
AP's properties" on page
4 To make this AP's configuration be the system's default AP settings, click Copy to Defaults. A pop-
up window asking you to confirm the configuration change is displayed.
5 To confirm resetting the system's default AP settings, click OK.

Configuring Altitude APs simultaneously

In addition to configuring Altitude APs individually, you can also configure multiple Altitude APs
simultaneously by using the AP Multi-edit functionality. Configuring Altitude APs simultaneously is
similar to modifying the system's default AP settings or individual Altitude APs.
When selecting the Altitude APs to simultaneously configure, you can use the following criteria:
Select the Altitude APs by hardware type
Select the Altitude APs individually
You can select multiple hardware types and individual Altitude APs by pressing the Ctrl key and
selecting the hardware types and specific Altitude APs.
NOTE
Only settings and options supported by all of the selected hardware types are available for configuring.
NOTE
When you configure multiple Altitude APs using the AP Multi-edit page, it is important to note that for some
Altitude AP settings to be available for configuration, other Altitude AP settings must be enabled or configured first.
Summit WM User Guide, Software Version 5.3
86.
"Modifying an Altitude
135