Setting Up Radio Properties - Extreme Networks Summit WM User Manual

NOTE
To achieve "higher call capacity", you must ensure that WMM QoS is deselected.
NOTE
The Altitude 802.11n APs support only the WMM QoS. If you are using 802.11n APs, and you want to achieve
"higher call capacity", you must ensure that WMM QoS is deselected. The Turbo Voice QoS does do not have any
effect on the 802.11n APs regardless of whether it is selected or not.
4 Under the Priority Processing section, select Priority Override.
5 Retain the default value in Service Class drop-down menu.
6 Retain the default value in DSCP marking drop-down menu.
7 Click Save.

Setting up Radio Properties

To set up the radio for Voice Wireless LAN in Altitude AP (Models 350-2i/350-2d):
1 From the main menu, click Altitude AP Configuration. The Altitude AP Configuration screen is
displayed.
2 From the list of Altitude APs, select the Altitude AP that is being used for the Voice WLAN.
3 On the Altitude AP Configuration screen, click 802.11b/g or 802.11a/g, depending upon the radio
that is being used for Voice WLAN.
4 Under Base Settings, set the DTIM Period to 3:
5 Under Basic Radio Settings, set the following parameters:
Tx Diversity: Set the Tx Diversity to either Left or Right.
Total # of retries for Voice VO: Set the Total # of retries for Voice VO to adaptive (multi-rate).
Summit WM User Guide, Software Version 5.3
375