Table of Contents
Advertisement
WM Access Domain Services configuration
3 From the Assignment by drop-down list, click AAA.
4 Configure the topology for your WM-AD accordingly. For more information, see
WM-AD" on page
5 To save your changes, click Save.
Saving your topology properties
Once your topology is defined, you can then save your topology properties to continue configuring
your WM-AD. To save your topology properties, click Save.
Assigning Altitude AP radios to a WM-AD
If two Summit WM Controllers have been paired for availability (for more information, see
6, "Availability and session
appear as foreign in the list of available Altitude APs on the other Summit WM Controller.
Once you have assigned an Altitude AP radio to eight WM-ADs, it will not appear in the list for
another WM-AD setup. Each radio can support up to eight SSIDs (16 per AP). Each AP can be assigned
to any of the WM-ADs defined within the system. The Summit WM Controller can support the
following:
WM200/2000 - Up to 64 WM-ADs
WM20 - Up to 8 WM-ADs
WM1000 - Up to 50 WM-ADs
164
156.
availability"), each Summit WM Controller's registered Altitude APs will
"Topology for a
Chapter
Summit WM User Guide, Software Version 5.3
Advertisement
Table of Contents
