Table of Contents
Advertisement
Summit WM100 Controller front panel
The Summit WM100 Controller does not have any component on the front panel except two LED lights.
The description of the LED states is provided below:
STATUS LED - For more information, see the STATUS LED description in
Controller back panel" on page
ACTIVITY LED - For more information, see the ACTIVITY LED description in
Controller back panel" on page
The STATUS LED is located on the back panel as well as the front panel of the Summit WM Controller
WM100.
Summit WM100 Controller back panel
The following figure identifies the main components on the back panel of Summit WM Controller
WM100.
Figure 26: Summit WM100 Controller back panel
Redundant power supply
NOTE
The Summit WM100 Controller has the same number of LED lights on the back panel as the Summit WM1000
Controller. The LED description of their state is also identical to WM100. For information on Summit WM100
Controller LEDs' states, see the descriptions of STATUS LED and ACTIVITY LED in
back panel" on page
327.
NOTE
Summit WM100 Controller may have a standard power supply (one power supply) or a redundant power supply (two
power supplies).
Summit WM User Guide, Software Version 5.3
327.
327.
Power switch
Management port
"Summit WM1000
"Summit WM1000
Data Ports
Console port
"Summit WM1000 Controller
329
Advertisement
Table of Contents
