Extreme Networks Summit WM User Manual page 245

6 Set the Altitude APs Poll Timeout value for fast failover.
To set the Poll Timeout value for fast failover:
a From the main menu of the primary Summit WM Controller, click Altitude AP Configuration.
The AP Properties page is displayed.
b In the left pane, click AP Multi-edit. The AP Multi-edit page is displayed.
c In the Hardware Types list, select the hardware type of the Altitude APs that are part of your
deployment. You can select multiple hardware types by pressing the CTRL key and clicking the
hardware in the Hardware Types list.
d In the Altitude APs list, select the Altitude APs for which you want to set the Poll Timeout
value. You can select multiple Altitude APs by pressing the CTRL key and clicking the Altitude
APs in the Altitude APs list.
Summit WM User Guide, Software Version 5.3
The Poll
Timeout value
should be 1.5 to
2 times of
Detect link
failure value
for fast failover
configuration.
245