Canada - Extreme Networks Summit WM User Manual

RF safety distance
The antennas used for this transmitter must be installed to provide a separation distance of at least 25
cm from all persons and must not be co-located or operating in conjunction with another antenna or
transmitter.

Canada

Industry Canada Compliance Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the interference-causing equipment standard entitled "Digital Apparatus," ICES-
003 of Industry Canada.
Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareils
numeriques de Classe B prescrites dans la norme sur le materiel brouilleur: "Appareils Numeriques,"
NMB-003 edictee par le Industrie Canada.
This device complies with Part 15 of the FCC Rules and Canadian Standard RSS-210. Operation is
subject to the following conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired
operation.
This Class B digital apparatus complies with Canadian ICES-003.
Operation in the 5150-5250 MHz band is only for indoor usage to reduce potential for harmful
interference to co-channel mobile satellite systems.
Please note that high power radars are allocated as primary users (meaning they have priority) and
can cause interference in the 5250-5350 MHz and 5470-5725 MHz bands of LE-LAN devices.
For the product available in the Canadian market, only channels 1 to 11 can be operated. Selection of
other channels in the 2.4 GHz band is not possible.
The maximum antenna gain permitted for the AP35X operating in the 5250-5350 MHz band to
comply with the e.i.r.p. limit is 4.3 dBi for the internal antenna and 5 dBi for the default external
antenna that is shipped with the unit. To comply with the e.i.r.p. limit with the optional external
antennas, refer to Table
The maximum antenna gain permitted for the AP35X operating in the 5725-5825 MHz band to
comply with the e.i.r.p. limit is 4.3 dBi for the internal antenna and 5 dBi for the default external
antenna that is shipped with the unit. To comply with the e.i.r.p. limit with the optional external
antennas, refer to Table
The maximum antenna gain permitted for the AP45X operating in bands 5250-5350 MHz and 5470-
5725 MHz to comply with the e.i.r.p. limit is 6 dBi for the internal antenna and 5 dBi for the external
antenna.
The maximum antenna gain permitted for the AP45X operating in the 5725-5825 MHz band to
comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as
appropriate is 6 dBi for the internal antenna and 5 dBi for the external antenna.
Summit WM User Guide, Software Version 5.3
40.
40.
349