Extreme Networks Summit WM User Manual page 190

WM Access Domain Services configuration
4 From the Filter ID drop-down list, click Default.
The Filtering tab automatically provides a Deny All rule already in place. This rule can be modified
to Allow All, if appropriate to the network access needs for this WM-AD.
Default filter examples
The following are examples of filtering rules for a default filter:
Table 19: Default filter example A
In Out
x x
x x
x x
x x
Table 20: Default filter example B
In Out
x
x
x
190
Allow IP / Port
Intranet IP, range
Port 80 (HTTP)
Intranet IP
x *.*.*.*.
Allow IP / Port
Port 80 (HTTP) on host IP
Intranet IP 10.3.0.20, ports 10-30
x Intranet IP 10.3.0.20
Description
Deny all access to an IP range
Deny all access to Web browsing
Deny all access to a specific IP
Allow everything else
Description
Deny all incoming wireless devices access to Web
browsing the host
Deny all traffic from the network to the wireless
devices on the port range, such as TELNET (port 23)
or FTP (port 21)
Allow all other traffic from the wireless devices to
the Intranet network
Summit WM User Guide, Software Version 5.3