Extreme Networks Summit WM User Manual page 53

to encrypt all RADIUS packets transmitted. If you do not configure a RADIUS key, packets are not
encrypted. The key itself is never transmitted over the network.
NOTE
Before you configure the system to use RADIUS-based login authentication, you must configure the Service-Type
RADIUS attribute on the RADIUS server. For more information, see the RADIUS-based login authentication section
in the Summit WM Technical Reference Guide.
To configure the RADIUS login authentication mode:
1 From the main menu, click Wireless Controller Configuration. The Wireless Controller
Configuration screen appears.
2 From the left pane, click Login Management. The Login Management screen appears.
3 Click the RADIUS Authentication tab. The RADIUS Authentication screen appears
.
4 In the Authentication mode section, select Radius.
5 From the menu, located next to the Use button, select the RADIUS Server that you want to use for
the RADIUS login authentication, and then click Use. The RADIUS Server's name is displayed in the
Configured Servers box, and in the Auth section, and the following default values of the RADIUS
Server are displayed.
NOTE
The RADIUS Serves displayed in the menu, located against the Use button, are defined on Global Settings
screen. For more information, see
Summit WM User Guide, Software Version 5.3
"WM-AD global settings" on page 149.
53