Extreme Networks Summit WM User Manual page 105

7 Click the Privacy tab. Some client devices will not use 802.11n mode if they are using WEP or TKIP
for security. Therefore, do one of the following:
Select None.
Select WPA-PSK, and then clear the WPA v.1 option:
Select WPA v.2.
In the Encryption drop-down list, click AES only.
8 Click the QoS Policy tab.
9 In the Wireless QoS section, select the WMM option. Some 802.11n client devices will remain at
54Mbps unless WMM is enabled.
Summit WM User Guide, Software Version 5.3
105