Applying The Product License Key; Setting Up The Data Ports - Extreme Networks Summit WM User Manual

Configuring the Summit WM Controller

Applying the product license key

To ensure all available system functionality is enabled, your product license key must be applied.
To apply the product license key:
1 From the main menu, click Summit Controller Configuration. The Summit Controller
Configuration page is displayed.
2 In the left pane, click Software Maintenance.
3 Click the SWM Product Keys tab.
4 In the Apply Product Key section, click Browse to navigate to the location of the product key file
and click the file.
5 Click Apply Now. The product license key is applied, and the Summit WM Controller reboots.

Setting up the data ports

The next step in the initial setup of the Summit WM Controller is to configure the physical data ports.
A new Summit WM Controller is shipped from the factory with all its data ports set up as host ports.
Support of management traffic is disabled on all data ports. Port configuration allows for the explicit
state of the administration state for each interface. By default, data interface states are enabled. A
disabled interface does not allow data to flow (receive/transmit).
36
Summit WM User Guide, Software Version 5.3