Enabling The Analysis And Data Collector Engines - Extreme Networks Summit WM User Manual

Working with the Summit WM series Spy

Enabling the Analysis and data collector engines

Before using the Summit WM series Spy, you must enable and define the Analysis and data collector
engines.
To enable the Analysis engine:
1 From the main menu, click Summit Controller Configuration. The Summit Controller
Configuration page is displayed.
2 In the left pane, click Summit Spy. The Summit Spy Configuration page is displayed.
3 To enable the Summit WM series Spy Analysis Engine, select the Enable Summit Spy Analysis
Engine checkbox.
4 To enable the Summit Spy Data Collection Engine on this Summit WM Controller, select the Enable
Local Summit Spy Data Collection Engine checkbox.
5 To identify the remote RF Data Collector Engine that the Analysis Engine will poll for data, type the
IP address of the Summit WM Controller on which the remote Data Collector resides in the IP
Address box.
NOTE
Currently, the Summit WM Controller WM20 does not support the Remote Collection Engines functionality of the
Summit WM Controller, Access Points and WM software solution. The Remote Collection Engines functionality is
only available for the Summit WM Controller WM200/2000.
6 For the data collection engine:
264
Summit WM User Guide, Software Version 5.3