Table of Contents
Advertisement
Summit WM Controller's physical description
Summit WM20 Controller
Summit WM20 Controller front panel
Figure 30: Summit WM20 Controller front panel
NOTE
The hot swap lever is not enabled in the current release. Pulling the hot swap lever will not affect the normal
operation if the Summit WM20 Controller is already running. However, if you attempt to reboot the Summit WM20
Controller with the hot swap lever pulled out, the controller will fail to reboot. If you pull the hot swap lever while
the Summit WM20 Controller is in operation, the Hot Swap LED will light up.
The Summit WM20 Controller has four lights on its front panel.
Figure 31: Summit WM20 Controller LED lights
The functional definitions of the Summit WM20 Controller's LEDs are provided below:
ACTIVITY LED - Indicates the CPU activity, including the amount of traffic carried to and from the
Altitude APs.
334
Hot Swap lever
Activity LED
Status LED
HDD Activity LED
Hot Swap LED
LAN ports
USB server
Management port
USB control
Summit WM User Guide, Software Version 5.3
Reset button
LEDs
Power switch
Advertisement
Table of Contents
