Extreme Networks Summit WM User Manual page 290

Working with reports and displays
Table 28: CDR Records and their description (Continued)
CDR Records
Acct-Authentic
Framed-IP-Address
Connect-Info
NAS-Port-Type
Called-Station-ID
Calling-Station-ID
Extreme-AP-Serial
Extreme-AP-Name
Extreme-WM-AD-Name
Extreme-SSID
Acct-Session-Time
Acct-Output-Packets
Acct-Input-Packets
Acct-Output-Octets
Acct-Input-Octets
Acct-Terminate-Cause
Authenticated_time
Disassociation_time
290
Description
Indicates how the user was authenticated, whether by
RADIUS (AAA), Local (Internal CP) or Remote (External CP).
The field displays one of the following values:
1 - AAA authentication
2 - Internal CP authentication
3 - External CP authentication
Indicates the address to be configured for the user
This field is sent from the NAS to indicate the nature of the
users' connection - 802.11b for Radio b/g or 802.11a for
radio a.
Indicates RADIUS NAS Port Type is Altitude 802.11
The Altitude AP's MAC address.
The client's MAC address.
The Altitude AP's serial number.
The Altitude AP's name.
The WM-AD name on which the session took place.
The SSID name on which the session took place.
The number of seconds the user has received the service.
The number of packets that were sent to the port in the
course of delivering this service to a framed user.
The number of packets that have been received from the port
over the course of this service being provided to a Framed
User.
The number of octets that were sent to the port in the course
of delivering the service.
The number of octets that were received from the port over
the course of the service.
Indicates how the session was terminated. The field displays
one of the following values:
1 - User Request
4 - Idle Timeout
5 - Session Timeout
6 - Admin Reset
11 - NAS Reboot
16 - Callback
17 - User Error
Indicates the time at which the client was authenticated. The
time is in the following format: Date hh:mm:ss. For example,
April 21 2008 14:50:24
Indicates the time at which the client was disassociated from
the Altitude AP. The time is in the following format: Date
hh:mm:ss. For example, April 21 2008 14:57:20.
Summit WM User Guide, Software Version 5.3