Configuring The Default Altitude Ap Settings - Extreme Networks Summit WM User Manual

To configure 802.1X EAP-TLS authentication in pass through mode using Multi-edit:
1 From the main menu, click Altitude AP Configuration. The Altitude APs page is displayed.
2 In the left pane, click AP 802.1X Multi-edit.
3 In the Altitude APs list, click one or more Altitude APs to configure. To click multiple Altitude APs,
click the Altitude APs from the list while pressing the CTRL key.
4 In the Bulk Certificate Upload section, click Browse. The Choose file window is displayed.
5 Navigate to the location of the zipped certificates file, and then click Open. The name of the zipped
certificates file is displayed in the ZIP Archive box.
6 In the Password box, type the password used during the certificates generation process.
7 Click Upload and Set certificates. Once complete, the Settings updated message is displayed in the
footer of the Summit WM GUI.

Configuring the default Altitude AP settings

Altitude APs are added with default settings. You can modify the system's Altitude AP default settings,
and then use these default settings to configure newly added Altitude APs. In addition, you can base
the system's Altitude AP default settings on an existing Altitude AP configuration or have configured
Altitude APs inherit the properties of the default Altitude AP configuration when they register with the
system.
The process of configuring the default Altitude AP settings is divided into three tabs:
Common Configuration - Configure common configuration, such as WM-AD assignments and static
configuration options for all Altitude APs including, the Altitude AP 350-2i/350-2d, the Altitude
802.11n AP 450/451, and the Outdoor AP.
Standard AP Defaults - Configure the default Altitude AP settings for only the Altitude AP 350-2i/
350-2d and Outdoor AP.
11n AP Defaults - Configure the default Altitude AP settings for only the Altitude 802.11n AP 450/
451.
To configure the default AP settings:
1 From the main menu, click Altitude AP Configuration. The Altitude APs page is displayed.
2 In the left pane, click WAP Default Settings.
Summit WM User Guide, Software Version 5.3
125