Configuring The Local Login Authentication Mode And Adding New Users - Extreme Networks Summit WM User Manual

NOTE
The Summit WM software enables you to recover the Summit WM Controller via the Rescue mode if you have lost its
login password. For more information, see the Summit WM Maintenance Guide.
Configuring the local login authentication mode and adding new
users
The local login authentication mode is enabled by default. If the login authentication was previously set
to RADIUS authentication mode, you can change it to the local authentication.
You can also add new users and define their access rights - whether administrative or read only.
To configure the local login authentication mode:
1 From the main menu, click Wireless Controller Configuration. The Wireless Controller
Configuration screen appears.
2 From the left pane, click Login Management. The Login Management screen appears.
.
3 In the Authentication mode section, select Local.
4 In the Add User section, select one of the following:
user_admin - Grants the administrator's access rights to the user.
user_read - Grants the 'read only' access right to the user.
5 In the User ID box, type the user's ID.
6 In the Password box, type the user's password.
Summit WM User Guide, Software Version 5.3
51