Table of Contents
Advertisement
Configuring the Summit WM Controller
Table 1: Summit WM Controller product families (Continued)
Summit WM Controller Model
Number
WM20
WM200
WM2000
System configuration overview
The following section provides a high-level overview of the steps involved in the initial configuration of
your system:
Step 1 - Before you begin configuration
Research the type of WLAN deployment that is required.
Step 2 - Preparing the network
Ensure relevant DHCP servers and RADIUS servers (if applicable) are available and configured.
28
Specifications
Two Data ports (10/100/1000 BaseT)
One Management port (10/100 BaseT)
One USB Control (console) port
One USB Server port (future use)
Built-in PSU, Hard Drive, Fans and Controller card - not field replaceable
Supporting up to 32 APs
Four Data ports (10/100/1000 BaseT)
One Management port (10/100 BaseT)
One Console port (DB9 serial)
Redundant and Field Replaceable Power modules
Redundant and Field Replaceable Fan modules
Field Replaceable Supervisory module
Field Replaceable Network Processor module
Field Replaceable Flash drive module
Support up to 100 APs
Four Data ports (10/100/1000 BaseT)
One Management port (10/100 BaseT)
One Console port (DB9 serial)
Redundant and Field Replaceable Power modules
Redundant and Field Replaceable Fan Modules
Field Replaceable Supervisory module
Field Replaceable Network Processor module
Field Replaceable Flash drive module
Support up to 200 APs
Summit WM User Guide, Software Version 5.3
Advertisement
Table of Contents
