Defining Admission Control Thresholds For Global Settings - Extreme Networks Summit WM User Manual

WM Access Domain Services
3 To define a RADIUS server available on the network, do the following:
In the Server Name box, type a name.
In the Server Address box, type the IP address of the RADIUS server.
In the Shared Secret box, type the password that is required in both directions. This password is
used to validate the connection between controller and the RADIUS server.
4 In order to proofread your password before saving the configuration, click Unmask. The password is
displayed. To mask the password, click Mask.
This precautionary step is highly recommended in order to avoid an error, later, when the Summit
WM Controller attempts to communicate with the RADIUS server.
5 To add the server to the list, click Add.
6 To remove a server, click the server in the list, and then click Remove selected server.
7 To save your changes, click Save.

Defining Admission Control Thresholds for Global Settings

To define admission control thresholds for WM-AD global settings:
1 From the main menu, click WM Access Domain Configuration. The WM Access Domains list is
displayed.
2 In the left pane, click Global Settings. The Authentication tab is displayed.
3 Click the Wireless QoS tab.
150
Summit WM User Guide, Software Version 5.3