Extreme Networks Summit WM User Manual page 77

Table 9: Outdoor AP LED status (Continued)
R1 LED R2 LED
Solid Off
Green
Blinking Green/
Yellow
Solid Green/
Yellow
Blinking Green/
Yellow
NOTE
After discovery is finished, the Left and Right LEDs will be Green for Ethernet uplink, and Yellow for WDS uplink.
NOTE
If the fatal AP error occurs, the Status LED will be solid Red.
Altitude 802.11n AP LED status
Figure 9 depicts the location of the LEDs on the Altitude 802.11n AP.
Figure 9: Altitude 802.11n AP LEDs
The LEDs, L1, L3 and L4 work in conjunction to indicate the general, high-level, and detailed state
respectively.
Summit WM User Guide, Software Version 5.3
F LED Outdoor AP's detailed status
Blinking Red Connecting with WM: Registration
Solid Red Registration failed
Blinking Red Connecting with WM: Image upgrade
Solid Red Image upgrade failed
Blinking Red Connecting with WM: Configuration
Solid Red Configuration failed
Off AP operating and running normally: Forced image upgrade
Solid Red Image upgrade failed
77