Extreme Networks Summit WM User Manual page 286

Working with reports and displays
NOTE
If you open only automatically refreshed reports, the Web management session timer will not be updated or reset.
Your session will eventually timeout.
The following is an example of the AP Inventory report:
The following is a description of the column names and abbreviations found in the AP Inventory
report:
Rdo - Radio
Ra - 802.11a radio. The data entry for an Wireless AP indicates whether the 11a radio is on or off.
Rb - 802.11b protocol enabled. Possible values are on or off.
Rg - 802.11g protocol enabled. Possible values are on or off.
Rn - 802.11n protocol enabled. Possible values are on or off.
DP - DTIM period
BP - Beacon Period
SRL - Short Retry Limit
LRL - Long Retry Limit
RT - RTS Threshold
FT - Fragmentation Threshold
Ch - Channel served by the corresponding radio.
PL - Power Level (Defined in the Wireless AP radio properties pages.)
BR - Basic Rate (Only applies to Wireless APs running 3.1 or earlier.)
ORS - Operational Rate Set (Only applies to Wireless APs running 3.1 or earlier.)
MnBR - Minimum Basic Rate (For more information, see the Wireless AP radio configuration tabs.)
MxBR - Maximum Basic Rate
MxOR - Maximum Operational Rate
RxDV - Receive Diversity
TxDV - Tx Diversity
Pmb - Preamble (long, short)
PM - Protection Mode
PR - Protection Rate
PT - Protection Type
286
Summit WM User Guide, Software Version 5.3