Viewing Cdrs - Extreme Networks Summit WM User Manual

Viewing CDRs

The following is a high-level overview of how to view CDRs:
Back up the CDR files on the local drive of the Summit WM Controller.
Copy the CDR files from the Summit WM Controller to the remote server.
Unzip the file.
Download the CDR files from the remote server to view CDRs.
NOTE
You cannot access the CDR files directly from the CDR directory.
When you back up CDRs, both the .work and .dat files are zipped into a single .zip file. This .zip file is
uploaded on the remote server. You can unzip this file from the remote server to extract the .work and
.dat files.When you back up CDRs, the eight CDR files - one for each day of the week, and an
additional working file - are zipped into a single .zip file. This .zip file is uploaded on the remote server.
You can unzip this file from the remote server to extract the eight CDR files.
You can back up and upload the files on the remote server either via the Summit WM GUI or CLI.
This section describes how to back up and copy the CDR files to a remote server via the Summit WM
GUI. For more information on how to copy the CDR file to the remote server via CLI, refer to the
Summit WM CLI Reference Guide.
To back up and copy the CDR files to a remote server:
1 From the main menu, click Wireless Controller Configuration. The Wireless Controller
Configuration page is displayed.
2 From the left pane, click Software Maintenance. The Software Maintenance page is displayed.
Summit WM User Guide, Software Version 5.3
291