Table of Contents
Advertisement
Mount and Connect the AP
Table 8: AP510e Box Contents (continued)
Quantity
1
2
2
2. Perform a visual inspection of the access point for any physical damage. Contact
Extreme Networks Support
Mount and Connect the AP
Caution
Only qualified personnel should perform installation procedures.
Use these instructions as guidelines for mounting and connecting the AP510e easily
and safely.
The AP510e comes with a stainless-steel main mounting bracket (#37201) that can be
used to mount the access point on a flat t-bar with flat ceiling tiles, flat surfaces, beams,
and some junction/gang boxes. An adaptor and brackets are available for mounting the
AP to non-flat ceiling tiles and t-bars.
To mount the AP510e on a junction/gang box, use the optional bracket (WS-MBI-
WALL04; #30516). All additional and optional parts are sold separately. For more
information on brackets and accessories, refer to
Usage
on page 16 section.
Mounting Brackets and Accessories Usage
The access point comes with the main mounting bracket (#37201; mounting bracket
for 802.11ax indoor access points). There are various optional brackets, an adapter, and
bracket accessories that can be purchased separately.
Table 9: Bracket purchase order information
Part number
37201
30518
16
ExtremeWireless™ AP510e
if there is any damage.
Description
Main mounting bracket for indoor access points (included in the
access point box), along with the 50 mm M3 security screw pack for
main mounting bracket
WS-MBI-DCMTR01 bracket
Items
AP510e access point
Phillips pan-head wood screws
Screw-in anchors
Mounting Brackets and Accessories
Install the Access Point
Advertisement
Table of Contents
