Documentation Feedback; Safety Information - Extreme Networks Summit WM User Manual

Table of Contents

Advertisement

Documentation feedback

If you have any problems using this document, please contact your next level of support:
Extreme Networks employees should contact the interactive Customer Engagement Team (i-CET).
Customers should contact the Extreme Networks Customer Support Center.
When you call, please have the following information ready. This will help us to identify the document
that you are referring to.
Title: Summit WM User Guide, Software Version 5.3
Part Number: 120481-00 Rev 02

Safety Information

Dangers
Replace the power cable immediately if it shows any sign of damage.
Replace any damaged safety equipment (covers, labels and protective cables) immediately.
Use only original accessories or components approved for the system. Failure to observe these
instructions may damage the equipment or even violate safety and EMC regulations.
Only authorized Extreme Networks service personnel are permitted to service the system.
Warnings
This device must not be connected to a LAN segment with outdoor wiring.
Ensure that all cables are run correctly to avoid strain.
Replace the power supply adapter immediately if it shows any sign of damage.
Disconnect all power before working near power supplies unless otherwise instructed by a
maintenance procedure.
Exercise caution when servicing hot swappable Summit WM Controller components: power supplies
or fans. Rotating fans can cause serious personal injury.
This unit may have more than one power supply cord. To avoid electrical shock, disconnect all
power supply cords before servicing. In the case of unit failure of one of the power supply modules,
the module can be replaced without interruption of power to the Summit WM Controller. However,
this procedure must be carried out with caution. Wear gloves to avoid contact with the module,
which will be extremely hot.
There is a risk of explosion if a lithium battery is not correctly replaced. The lithium battery must be
replaced only by an identical battery or one recommended by the manufacturer.
Always dispose of lithium batteries properly.
Do not attempt to lift objects that you think are too heavy for you.
Summit WM User Guide, Software Version 5.3
11

Advertisement

Table of Contents
loading

Table of Contents