Extreme Networks Summit WM User Manual page 300

Performing system administration
3 Click the Blacklist tab.
4 To add a new MAC address to the blacklist, in the MAC Address box type the client's MAC address.
5 Click Add. The client is displayed in the MAC Addresses list.
NOTE
You can use the Select All or Clear All buttons to help you select multiple clients.
6 To save your changes, click Save.
To clear an address from the blacklist:
1 From the main menu, click Altitude AP Configuration. The Altitude AP Configuration page is
displayed.
2 From the left pane, click Client Management. The Disassociate tab is displayed.
3 Click the Blacklist tab.
4 To clear an address from the blacklist, select the corresponding checkbox in the MAC Addresses list.
5 Click Remove Selected. The selected client is removed from the list.
NOTE
You can use the Select All or Clear All buttons to help you select multiple clients.
6 To save your changes, click Save.
300
Summit WM User Guide, Software Version 5.3