Blacklisting A Client - Extreme Networks Summit WM User Manual

Performing system administration
To disassociate a wireless device client:
1 From the main menu, click Altitude AP Configuration. The Altitude AP Configuration page is
displayed.
2 From the left pane, click Client Management. The Disassociate tab is displayed.
3 In the Select WAP list, click the WAP you want to disassociate.
4 In the Select Client(s) list, select the checkbox next to the client you want to disassociate.
NOTE
You can search for a client by MAC Address, IP Address or User ID, by selecting the search parameters from the
drop-down lists and typing a search string in the Search box and clicking Search. You can also use the Select All
or Clear All buttons to help you select multiple clients.
5 Click Disassociate. The client's session terminates immediately.

Blacklisting a client

The Blacklist tab displays the current list of MAC addresses that are not allowed to associate. A client is
added to the blacklist by selecting it from a list of associated APs or by typing its MAC address.
298
Summit WM User Guide, Software Version 5.3