Understanding The Altitude Ap Led Status - Extreme Networks Summit WM User Manual

Understanding the Altitude AP LED status

When the Altitude AP is powered on and boots, you can follow its progress through the registration
process by observing the LED sequence as described in the following sections.
Altitude AP LED status
The following figure depicts the location of the three LEDs on the Altitude AP.
Figure 7: Altitude AP LEDs
WARNING!
Never disconnect an Altitude AP from its power supply during a firmware upgrade.
Disconnecting an Altitude AP from its power supply during a firmware upgrade may cause firmware corruption
rendering the AP unusable.
LEDs color codes
The AP LEDs indicate "normal-operation", "warning/special", or "failed" state of the Altitude AP in the
following color codes:
Green - Indicates the normal-operation state.
Orange/Amber - Indicates the warning, or special state such as WDS.
Red - Indicates the error state.
Blinking - Indicates that the state, such as initialization, or discovery is in progress.
Steady - Indicates that the state is stable/completed. For example, initialization finished, or
discovery completed.
Summit WM User Guide, Software Version 5.3
Left LED
Status Right LED
2.4 GHz
LED 5 GHz radio
radio activity
activity
73