Printing Labels - Intermec EasyCoder 4100 User Manual

4100 Bar Code Label Printer User's Manual
Note: After the format is selected, the field pointer points to the lowest numbered data
entry field. All host entered/variable data is cleared from this format.

Printing Labels

Once you have loaded the media, the 4100 is ready to print labels. Before you
print labels make sure you have:
• Loaded the correct size and type of media into the printer.
• Loaded ribbon into the printer if you will be printing in thermal transfer
• Lowered the printhead securely into place.
• Switched the Thermal/Thermal Transfer switch to the appropriate setting
• Set the DIP switches to the appropriate printing configuration.
• Turned on the power to the printer.
• Connected the printer to the host or to the data collection network.
You are now ready to print labels by downloading data from the host to the
4100 printer. Refer to Chapter 6, "Designing Labels and Using Commands,"
and Chapter 7, "Printer Commands."
3-20
mode.
for the type of printing you will be doing.
Helvitica condensed 9 pt italic
C o d e 3 9 1 8 p t