Unpacking The 4100; Checking The Order For Completeness; Reporting Damage Or Defects - Intermec EasyCoder 4100 User Manual

Helvitica condensed 9 pt italic
C o d e 3 9

Unpacking the 4100

Unpack the printer and put it on a clean, stable surface for testing. Remove the
packing material from the printer mechanism that was used to prevent damage
during shipping. Store the shipping container and materials in case you need
to ship the printer for any reason.
The front panel cover of the printer is packed in a separate bag and must be
installed on the printer. Refer to the instructions later in this section.

Checking the Order for Completeness

As you unpack the printer, verify the contents of the shipping container against
this list.
• 4100 printer
• Front panel cover
• AC power cord
• 4100 Printer User's Manual
• Media envelope (contains sample thermal media and information on
If any parts are missing, please contact your local Intermec representative.

Reporting Damage or Defects

Your 4100 printer was thoroughly tested and inspected before it was shipped
from the factory. If any items are damaged, you can take the following steps to
correct the problem.
• Take photographs if necessary.
• Contact the transport carrier.
Note: The customer is responsible for all damage claims against the carrier. See the
"Intermec Terms of Sale" printed on your sales invoice.
1 8 p t
Intermec media products).
1
Getting Started
1-13