Storage Area Usage, Transmit; Test And Service Mode, Enter; User-Defined Characters, Transmit - Intermec EasyCoder 4100 User Manual

Helvitica condensed 9 pt italic
C o d e 3 9

Storage Area Usage, Transmit

Purpose:
Syntax:
Notes:

Test and Service Mode, Enter

Purpose:
Syntax:
Notes:

User-Defined Characters, Transmit

Purpose:
Default:
Syntax:
Notes:
1 8 p t
Uploads information on the amount of storage RAM
allocated and the amount of allocated RAM that is not
being used.
<ESC>m
The amounts are measured in kilobytes.
The printer uploads the amount of total RAM available
for formats, fonts, and UDCs. It is followed by the amount
of available RAM not being used. The numbers are
separated by a comma: 32,10.
Enters Test and Service mode.
<ESC>T
The printer completes all print jobs before executing this
command. Any host entered data entered prior to the
command is erased when the printer enters Test and
Service mode.
Uploads a graphic from the printer in the form of
commands and data the printer receives to create the
graphic.
n=0
<ESC>u{n}
n is the graphic ID number. It has a range from 0 to 99.
If the printer is in Advanced mode, each data byte
represents 6 bits of the graphic bitmap. If the printer is in
86XX Emulation mode, each data byte represents one bit
of the graphic image.
An error code (28) is generated if an invalid number is
entered.
7
Printer Commands
7-29