Amount Of Storage, Define; Audible Alarm, Enable Or Disable; Auto-Transmit 1, Enable - Intermec EasyCoder 4100 User Manual

4100 Bar Code Label Printer User's Manual

Amount of Storage, Define

Purpose:
Default:
Syntax:
Notes:

Audible Alarm, Enable or Disable

Syntax:
Notes:

Auto-Transmit 1, Enable

Purpose:
Syntax:
7-32
Helvitica condensed 9 pt italic
C o d e
FrGoth
Defines the amount of RAM allocated for storage in
kilobytes.
n = 20 Without expanded RAM
n = 120 With expanded RAM
<SI>N{n}
n can be adjusted from 10K to 32K without the addition of
expanded RAM.
n can be adjusted from 10K to 128K with the addition of
expanded RAM.
n is the amount of RAM allocated in kilobytes.
This command is designed for printers that share image
generation and format/UDC/fonts storage area.
This command is buffered up and is effective upon
execution. When this command is executed, all previously
stored format, fonts or UDCs are erased, but the printer
configuration remains unchanged.
<SI>a{n}
This command is ignored by the 4100 printer.
Enables auto-transmit level 1.
<ESC>j
The status response codes are as follows:
<DC1> Fault cleared
Label at strip pin
<FS>
Take-up reel full
<BS>
No label stock
<EM>
3 9 1 8 p t