Program Number, Transmit; Quantity Count, Set; Start And Stop Codes (Code 39), Print - Intermec EasyCoder 4100 User Manual

4100 Bar Code Label Printer User's Manual
Notes:

Program Number, Transmit

Purpose:
Syntax:
Notes:

Quantity Count, Set

Purpose:
Default:
Syntax:
Notes:

Start and Stop Codes (Code 39), Print

Purpose:
Syntax:
Notes:
7-28
Helvitica condensed 9 pt italic
C o d e
All previously entered data is lost upon execution of this
command.
FrGoth
Transmits both the program number and the version
number.
<ESC>M
Here is an example of what you might see: 059877,1.4.
This command uploads the program and software version
number to the host as an ASCII alphanumeric character
string.
Sets the quantity of label batches to be printed by the next
print command.
n=1
<RS>{n}
The range for n is from 1 to 9999.
An error code (21) is generated if the quantity is out of
range.
Incrementing and decrementing of data occurs between
label batches.
Instructs the current Code 39 field to print only the start
and stop characters.
<ESC><SP>
All previous data for the current field is cleared.
3 9 1 8 p t