Current Edit Session, Save; Data Source For Format In A Page, Define - Intermec EasyCoder 4100 User Manual

Helvitica condensed 9 pt italic
C o d e 3 9

Current Edit Session, Save

Purpose:
Syntax:
Notes:

Data Source for Format in a Page, Define

Purpose:
Default:
Syntax:
Notes:
1 8 p t
Saves the current page, format, UDC, or UDF being
edited. The printer remains in program mode.
N
The current page, format, UDC, or UDF is automatically
saved when a new one is called or when program mode is
exited.
Defines a data source for a format assigned to a page
position.
n=0
m1=a
m2=0
e{n}{,m1}{,m2};
e0;
The format receives its data during print mode.
e1{,m1}{,m2};
The format is a slave of another format within this page.
m1 is the position of the master format within the page.
The default is a.
m2 is the data offset to apply to the slave format. The
default is 0. Only data delimited by numeric field
separator <FS> or alphanumeric field separator <GS> can
be offset.
The format ID must be the same for both the master and
slave formats.
7
Printer Commands
7-53