Upc - Intermec EasyCoder 4100 User Manual

4100 Bar Code Label Printer User's Manual
A "." is used to delimit the bar code data from the supplemental data. Data to
the right of the "." is supplemental data; data to the left is bar code data. The
two or five digit supplemental can be added to any version of the UPC/EAN
code.
The flag 1 option only applies to EAN 8, EAN 13, and UPC version A. For
EAN 13, enabling the flag 1 option prints the first character of the bar code
interpretive. For EAN 8 and UPC version A, enabling the flag 1 option moves
the first and last character of the bar code interpretive outside of the guard
bars.
c7,0{,m2}
c7,1{,m2}
c7,2{,m2}
c7,3{,m2}
m2 selects UPC/EAN codes as listed below. Default is 0.
c8{,m1}{,m2}
7-46
Helvitica condensed 9 pt italic
C o d e
FrGoth
Select UPC/EAN Codes. Printer enters check digit and
flag 1 enable.
Select UPC/EAN Codes. Printer enters check digit and
flag 1 disabled.
Select UPC/EAN Codes. Host enters check digit and
printer verifies Flag 1 enabled.
Select UPC/EAN Codes. Host enters check digit and
printer verifies. Flag 1 disabled.
0
variable length
1
EAN 8
2 EAN 13
3 UPC Version A
4 UPC Version E
5 UPC Version D1
6
UPC Version D2
7 UPC Version D3
8 UPC Version D4
9 UPC Version D5
Selects HIBC Code 39. Default for m1 is 0. m2 is the field
identifier.
3 9 1 8 p t