Character Fields And Fonts - Intermec EasyCoder 4100 User Manual

4100 Bar Code Label Printer User's Manual

Character Fields and Fonts

You can print character fields in any one of the printers internal fonts. The 4100
printer contains several resident bitmap fonts. Bitmap fonts are defined as a
matrix of dots and blanks. Change the size of the bitmap font (the fonts
themselves remain unchanged) by using the width and height magnification or
by using the pitch or point size commands. The font character chart is shown in
the Appendix.
The set of internal fonts in the 4100 printer contains:
• Three standard bitmap fonts measured in dot sizes (7x9, 7x11, and 10x14).
• Two bitmap fonts that can be recognized by optical character recognition
• Three bitmap fonts measured in point sizes 8, 12, and 20.
Examples of the 4100 printers internal fonts are shown on the label below.
6-14
(OCR) programs.
c20 8 POINT FONT
c21 12 POINT FONT
c22 20 POINT FONT
c24 OCR FONT B
Helvitica condensed 9 pt italic
C o d e 3 9 1 8 p t
4100-74