Table of Contents
Advertisement
Helvitica condensed 9 pt italic
C o d e
3 9
The <ETX> and <STX> characters are used to mark the beginnings and ends of
the command strings. The other characters are explained in the following table.
Fr Goth
Command
<ESC>C
<ESC>P
E5;F5;
H0;
o35,40;
c21;
d3,Cat.;
k10;
H1;
o35,70;
c21;
d3,No.;
k10;
H2;
o165,0;
c21;
d3,432-3221;
k40;
H3;
o785,40;
c21;
d3,std.;
k10;
H4;
o785,70;
c21;
1 8
p t
Description
Operate in Advanced mode.
Enter Programming mode.
Erases anything previously stored as format 5 and accesses the location
for format 5.
Defines field zero as a human-readable field.
Sets the origin of field zero at coordinates (35,40).
Sets the font for field zero to font 21.
Sets the data for field zero to have the constant value: Cat.
Sets the point size to 10.
Defines field one as a human-readable field.
Sets the origin of field 1 at coordinates (35,70).
Sets the fonts for field 1 to font 21.
Set the data for field 1 the constant value: No.
Sets the point size to 10.
Defines field 2 as a human-readable field.
Sets the origin of field 2 at (165,0).
Sets the font of field 2 to font 21.
Sets the constant data for field 2.
Set the point size to 40.
Defines field 3 as a human-readable field.
Sets the origin of field 3 at (785,40).
Sets the font for field 3 to font 21.
Defines constant data for field 3.
Sets the point size to 10.
Defines field 4 as a human-readable field.
Sets the origin of field 4 at (785,70).
Sets the font for field 4 to font 21.
Designing Labels and Using Commands
6
6-33
Advertisement
Table of Contents
