Remaining Quantity And Batch Count, Transmit; Reset; Status Dump - Intermec EasyCoder 4100 User Manual

4100 Bar Code Label Printer User's Manual

Remaining Quantity and Batch Count, Transmit

Purpose:
Syntax:

Reset

Purpose:
Syntax:
Notes:

Status Dump

Purpose:
Syntax:
7-16
Helvitica condensed 9 pt italic
C o d e
If continuous stock is selected, the printer transmits the
length defined by the <SI>L command (default is 1000).
FrGoth
The gap length is 0.
Uploads the remaining quantity and batch counts for the
current print job.
<ESC>Q
Executes a printer power-up reset immediately.
<DLE>
All data and commands in the input buffer are erased
upon reset.
Causes the printer to upload all current printer status.
<VT>
The printer status is uploaded in the following order of
priority:
Buffer already full
<GS>
Ribbon fault
<US>
No label stock
<EM>
<DC3> Buffer now full
Label at strip pin
<FS>
<DC1> Skipping
<DC1> Printing
<DC1> Ready
3 9 1 8 p t