Table of Contents
Advertisement
Helvitica condensed 9 pt italic
C o d e
3 9
Notes:
Auto-Transmit 2, Enable
Purpose:
Syntax:
Notes:
Auto-Transmit 3, Enable
Purpose:
Syntax:
Notes:
Auto-Transmit 1, 2, and 3, Disable
Purpose:
Syntax:
Notes:
1 8
p t
Ribbon fault
<US>
Label path open
<US>
The printer automatically transmits the status response
codes listed above when necessary.
This command becomes effective upon execution.
Enables auto-transmit level 2.
<ESC>d
At level 2, the printer automatically transmits the status
response code <DC1> (room in input buffer). Without
auto-transmit enabled, the host must use the <ENQ> or
<VT> command to determine the status.
This command becomes effective upon execution.
Enables auto-transmit level 3.
<ESC>e
The status response codes are as follows:
Imager overrun
<HT>
<SOH> Printing is complete and the buffer is empty
Insufficient RAM for printing or storage
<RS>
A status response is transmitted when this condition
occurs.
This command becomes effective upon execution.
Disables the auto-transmit statuses.
<ESC>k
This command becomes effective upon execution.
7
Printer Commands
7-33
Advertisement
Table of Contents
