Table of Contents
Advertisement
4100 Bar Code Label Printer User's Manual
Line Field, Create or Edit
Purpose:
Default:
Syntax:
Notes:
Outline Font, Clear or Create
Purpose:
Syntax:
Notes:
Outline Font, Download
Purpose:
Syntax:
Notes:
7-62
Helvitica condensed 9 pt italic
C o d e
FrGoth
Use this command to access or create a line field n.
n=0
L{n}{,name}
n values can range between 0 and 199.
,name is an optional field. The field can be up to eight
ASCII characters.
Parameters for the default field:
Field origin
0,0
Field direction 0 degrees
Line length
100
Line width
1
Clears/creates on outline user-defined font.
J{n}{,name}
The font ID is n and ,name is an optional field of up to
eight ASCII characters except for the semicolon. If font set
n has already been defined, all previous font description
will be erased.
This command is only available with the addition of
expanded RAM.
Downloads outline font descriptions where n is the
information describing all characters within the font.
j{font description...}
The printer will store the incoming font description into
the font selected by the J command. This command is only
available with the addition of expanded RAM.
3 9
1 8
p t
Advertisement
Table of Contents
