Label Stock Type, Select; Label Width, Set; Maximum Label Length, Set; Media Sensitivity, Select - Intermec EasyCoder 4100 User Manual

Helvitica condensed 9 pt italic
C o d e 3 9

Label Stock Type, Select

Purpose:
Default:
Syntax:
Notes:

Label Width, Set

Syntax:
Notes:

Maximum Label Length, Set

Purpose:
Default:
Syntax:
Notes:

Media Sensitivity, Select

Purpose:
Default:
1 8 p t
Selects the type of label stock.
n=1
<SI>T{n}
n=0 Continuous label stock (no breaks between
labels).
n=1 Label stock with gaps between labels.
n=2 Label stock with marks between labels (on back
of label stock).
To make this command effective, reset the printer, cycle
the power, or press the [FEED] after issuing the
command.
<SI>W{n}
This command is ignored by the 4100 printer.
Defines the maximum label length as n dot increments.
This number is used only for detecting media faults. It is
not used to limit the image size of a format on the label.
n=1000
<SI>L{n}
n must be a number from 100 to 4800 in dot increments.
To make this command effective, reset the printer or cycle
the power after issuing this command.
Selects the media sensitivity of the printer.
n=0
m=420 for direct thermal media
m=567 for thermal transfer media
7
Printer Commands
7-37