Intermec EasyCoder 4100 User Manual page 115

Bar code label printer
Hide thumbs Also See for EasyCoder 4100:
Table of Contents

Advertisement

Helvitica condensed 9 pt italic
C o d e
3 9
Error
Code
Problem
26
Invalid page transmission syntax
27
Invalid font transmission syntax
28
Invalid UDC transmission syntax
32
Non-immediate command or data
received after buffer full
33
Invalid field delimiters
34
Invalid escape command
35
Invalid data shift command
36
Invalid or undefined format number
37
Insufficient room in RAM to print format
38
Invalid or undefined field number
41
Syntax error for program commands
42
Insufficient room in RAM to store format
43
Too many fields in label format
46
Undefined statement
52
Invalid UDC/UDF bitmap cell
height/width or intercharacter space
53
Insufficient room in RAM to store UDC or
UDF
54
Invalid UDC command syntax
1 8
p t
Solution
Check the page transmission syntax. The correct syntax
is <ESC>y [n] with n ranging from 0 to 9.
Check the font transmission syntax. The correct syntax
is <ESC>v [n] with n ranging from 0 to 24.
Check the UDC transmission syntax. The correct
syntax is <ESC>u [n] with n ranging from 0 to 99.
Allow the printer to empty the buffer contents before
sending commands or data.
Check for all pairs of field delimiters and make sure
both are numeric, or both are alphanumeric.
Correct the escape command syntax.
Correct the shift command syntax.
Verify that the format numbers are between 0 and 19.
Reduce the number of data fields in the format.
Verify the field number in the label format.
Check the program command for proper syntax.
If the format still does not fit, delete some fields or
other data from the format, or remove or reduce the
UDCs, formats, or fonts. The command <ESC>m tells
the host how much memory is installed and how much
is available.
You can use up to 200 fields in a format. Delete fields
until you have 200 or fewer.
Check the statement syntax.
Verify that cell heights and widths are between 1 and
599, and that the intercharacter space is between 0 and
199.
Remove or reduce formats, fonts, or UDCs.
Correct the UDC command syntax.
5
Troubleshooting
5-9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EasyCoder 4100 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents