Print Line Dot Count Limit, Set; Program Mode, Exit; User-Defined Character, Clear Or Create; User-Defined Character Field, Create Or Edit - Intermec EasyCoder 4100 User Manual

4100 Bar Code Label Printer User's Manual
Syntax:
Notes:

Print Line Dot Count Limit, Set

Purpose:
Syntax:

Program Mode, Exit

Purpose:
Syntax:

User-Defined Character, Clear or Create

Purpose:
Syntax:
Notes:

User-Defined Character Field, Create or Edit

Purpose:
Default:
7-64
Helvitica condensed 9 pt italic
C o d e
k{n}
FrGoth
n values can range between 4 and 212.
This command works most effectively on fonts c20, c21,
and c22.
The printer must be in advanced mode to use this
command. Point size equals 1/72 inch. A higher point
size means larger characters.
This is a null command and is ignored by the printer.
v{n}
Instructs the printer to exit program mode and enter print
mode. Any format or page currently being edited is
saved.
R
This is the command to clear or create a graphic bitmap.
G{n}{,name}
n values can range between 0 and 99.
,name is an optional field. The field can be up to eight
ASCII characters except for semicolon, but cannot start
with a numeric character.
If graphic n has already been defined, it is erased and
redefined.
Use this command to edit or create a graphic field n.
n=0
3 9 1 8 p t