Table of Contents
Advertisement
4100 Bar Code Label Printer User's Manual
Data Shift – International Characters
Purpose:
Syntax:
Notes:
Field, Select
Purpose:
Default :
Syntax:
Notes:
Field Decrement, Set
Purpose:
Default:
Syntax:
7-22
Helvitica condensed 9 pt italic
C o d e
FrGoth
Allows command characters to be entered as data.
<SUB>
In 86XX Emulation mode, this command shifts the next
character (if not a control character) into the upper
character bank (setting the eighth bit to 1) to print
international characters.
This allows command characters to be entered as data
instead of commands in both Advanced and 86XX
Emulation mode.
Selects a data field for entering or working with data.
n=0
<ESC>Fn or <ESC>F{"name"}
The range for n is from 0 to 199.
The parameter for this command can either be the field
number or the field name, but not both. If neither are
present, the printer defaults to 0.
If the field number is used, all following data is entered
into field n. If the field name is used, all following data is
entered into all fields with the specified name in the
current format or page. The field name must be bracketed
by quotation marks ("").
An error code (33) is generated if an invalid field number
is entered.
Sets the field decrement value for the selected field.
n=1
<ESC>D{n}
3 9
1 8
p t
Advertisement
Table of Contents
