Page, Create Or Edit; Page, Delete; Pitch Size, Set; Point Size, Set - Intermec EasyCoder 4100 User Manual

Helvitica condensed 9 pt italic
C o d e 3 9

Page, Create or Edit

Purpose:
Syntax:
Notes:

Page, Delete

Purpose:
Syntax:
Notes:

Pitch Size, Set

Purpose:
Default:
Syntax:
Notes:

Point Size, Set

Purpose:
Default:
1 8 p t
Use this command to edit or create a page.
S{n}
n is the numeric page ID. Values for n can range between
1 and 9.
The default page cannot be edited. An error code is
generated if a page number is out of range.
Use this command to delete a page.
s{n}
n is the numeric page ID. n values can range between 1
and 9.
The default page (page 0) cannot be deleted.
In advanced mode, this command can be used to set the
pitch size which can define the size of the characters in
human-readable fields. When used, the height and width
magnification and point size are disabled.
n=12
g{n}
n values can range between 1 and 50.
This command can be used for both bitmap and outline
fonts. Pitch is characters per line. A higher pitch results
in smaller characters.
In advanced mode, this command can be used to set the
point size which can define the size of the characters in
human-readable fields.
n=12
7
Printer Commands
7-63