Table of Contents
Advertisement
Helvitica condensed 9 pt italic
C o d e
3 9
If any of these items are near the printer, you can reduce the effects of their
electrical noise by following these directions:
• Always use shielded cable. Connect the cable and shield to the metal
backshells on the cable connectors and fasten the connectors to the serial
ports using screws.
• Install ferrite cable clamps.
• Connect the printer chassis ground to the building ground. The chassis
ground is on the ground pin of the printer power cord.
Some experimentation may be required to eliminate the problems. If you need
help, ask your Intermec representative for assistance.
1 8
p t
Installing the Printer
2
2-21
Advertisement
Table of Contents
