Intermec EasyCoder 4100 User Manual page 217

Helvitica condensed 9 pt italic
C o d e 3 9
The next three modifiers conform to Supplier Standard:
c8,0
c8,1
c8,2,m2
The next four modifiers conform to Provider Standard:
c8,3
c8,4
c8,5,m2
c8,6
c9
<SUB> 1 is used to represent the Function 1 character in 86XX Emulation mode.
In Advanced mode, the Function 1 character is represented by entering
<SUB><SUB> 1. The characters for Functions 2, 3, and 4 are represented in the
same way.
If you want to produce a square symbol, specify a height magnification of 1 in
advanced mode. A square symbol is specified by a height magnification of 250
in emulation mode.
c10
In emulation mode, <SUB> 1 is used to represent the Function 1 character. In
advanced mode, <SUB><SUB> 1 is used to represent the Function 1 character.
The characters for Functions 2 and 3 are represented in the same way.
If you want to produce a square symbol, specify a height magnification of 1 in
advanced mode. A square symbol is specified by a height magnification of 250
in emulation mode.
Only alphanumeric (0) and numeric (2) modes are supported.
1 8 p t
Select HIBC Code 39. Primary format.
Select HIBC Code 39. Alternate primary format.
Select HIBC Code 39. Secondary format. The linkage
character comes from m2, which is the field identifier.
Select HIBC Code 39. Single format.
Select HIBC Code 39. First data format.
Select HIBC Code 39. Second data format. The linkage
character comes from m2, which is the field identifier.
Select HIBC Code 39. Multiple data format.
Select Code 16K.
Select Code 49.
7
Printer Commands
7-47