4100 Printer Options; Present Sensor/Self-Strip; Memory Expansion; Cutter And Tray - Intermec EasyCoder 4100 User Manual

Helvitica condensed 9 pt italic
C o d e 3 9
Command
Disable autotransmit 1*
Enable autotransmit 2*
Enable autotransmit 3*
Total bytes
*Only sent if enabled

4100 Printer Options

Listed below are some of the options available with the 4100 printer. Consult
your Intermec representative for a complete list of options. Each 4100 printer
option includes an instruction sheet.

Present Sensor/Self-Strip

The 4100 printer is mechanically configured for self-strip printing. However,
you must have the optional Present Sensor installed to print in Self-Strip mode.
If you apply labels one at a time as soon as they are printed, you can work more
quickly and easily with Self-Strip mode. With this option, the printer does not
present a new label until you have removed the previous one.

Memory Expansion

The memory expansion option provides an additional 256K of nonvolatile
(battery backed) bulk storage to hold more formats, fonts, or bit-mapped
graphics. It also increases the printer's image buffering capabilities. The
addition of expansion RAM allows you to print 4 by 4 inch characters and
graphics. The memory expansion option also includes the outline font c25.

Cutter and Tray

With the cutter and tray, your 4100 printer cuts media into individual labels
and drops them into a tray ready for use. This option works best for individual
random lengths or short batches of different label lengths.
1 8 p t
Syntax
<ESC>j
<ESC>d
<ESC>e
Appendix
Bytes
2
2
2
195-203
A
A-13