Printer Component Descriptions (Rear View); Dip Switches - Intermec EasyCoder 4100 User Manual

Helvitica condensed 9 pt italic
C o d e 3 9

Printer Component Descriptions (Rear View)

The following table contains descriptions of the printer components as shown
in the previous illustration.
No. Name
1

DIP switches

2 Fuse holder
3 Power switch
4 AC power cord receptacle
5 Serial communications port
1 8 p t
Description
Control various printer modes and configuration settings.
The top bank of DIP switches is above the serial port and the
bottom bank is beneath the serial port.
Contains a 1.5A Slo-Blo fuse for 115 VAC operation or a
double pole circuit breaker at 1.2A for 230 VAC operation.
Turn the printer on by moving the switch to the ON position
and off by moving it to the OFF position.
The AC power cord plugs into this receptacle.
Connects the printer to a host computer with a 25-pin
D-style subminiature receptacle.
1
Getting Started
1-9